1、 快速 不需焊接和再鍍鋅，安裝速度比法蘭連接管件快3倍以上。
(Quick: Don’t need to weld and galvanize, the setting time is 3 times quicker than the flange connect fitting.)
2、 簡易 它比法蘭輕、鎖緊機械設計巧妙，螺栓數量少，無須對孔對鎖。
(Simple: Compared to flange, its more light, the locking machine is designed handiness, the bolt quantity are few, doesn’t need to holeblockage. )
3、 可靠 改卡箍、墊圈與管端溝槽系全圓壓緊，其管端拉力強度，試驗壓力達
4.2Mpa，溫度－30°C～100°C，真空度可達0.08Mpa；墊圈設計為C型，能形成三重防漏，管內壓力越大，密封越好；墊圈可因流體介質、管材、溫度來進行合適的選擇密封圈材質。
Reliable: The change clip, gasket and the jet trench is pressed tightly, its jet tensile strength, the test pressure reaches 4.2Mpa, the temperature - 30°C ~ 100°C, the vacuum degree may reach 0.08Mpa; The gasket design is C, can form tertiary guard against leaking, the more pressure is in the internal, the sealing will be more better; The gasket fits different sealing material according to the fluid medium, the tubing, the temperature .

4、隔振吸震
Separate vibration and attract shake

⑴因管末端有間隙可有效地隔斷噪音及振動地傳播，熱脹冷縮時管路亦不受影響；
It can be effectively separate the noise and vibration as its have some space at the end of the tube, the pipeline is not affected when thermal expansion or contraction.

⑵密封墊圈也可吸收噪音及振動。
The hard sealing gasket also can absorb the noise and vibration.
5、經濟安全
Ecnomy safely
便于工程預算較法蘭式連接節約總工程費用地20％，施工無需電源、氧氣、明火。
It’s easy for project budget and can save 20% of the total charge compared to flange connecting, the construction don’t need the power supply, oxygen, and fire.
6、零污染 因原件不存在焊渣和破壞鍍鋅層與涂塑層的問題。故可確保管道暢通。連接后的管路尤其消防噴淋系統不會因其他方式的連接而生產銹蝕堵塞管路中的設備。
No pollution
Because the original parts do not exist such problems: weld dregs , destruct the galvanization level and spread model level. It can guarantee the pipeline to be unimpeded. After connecting, the pipeline especially fire prevention spray system will not produce rust to jam the equipment because of other ways connection.

7、占據空間少
Little holding space
法蘭安裝空間較卡箍接頭為3：2。
卡箍接頭及配件可先進行安裝，并可調整任意方向、角度。
The flange installment space compares the clip attachment is 3: 2. The clip attachment and the fittings may first carry on the installment, and can adjust the random orientation, the angle.

8、維護方便
拆洗與更換只需拆下兩個卡箍，4個螺栓即可，便于管路延伸、更換、轉動方向。
Maintain conveniently
Takes apart and washes only need to dismantle two clips, 4 bolts . are advantageous for the pipeline to extend, replace and rotate the direction.